Description:
The DeWalt DW746 is a heavy duty 10" workers table saw offered by DeWalt. The massive cast iron turning provides solid arbor support delivering smooth, accurate cutting performance. The blade is easily adjusted in elevation and angle with easy to reach blade elevation crank and large, adjustable bevel scale and the graduated bevel crank, where each revolution equals 2 degrees of adjustment. The large easy-access on/off switch eliminates fumbling around when starting or stopping a cut. The saw is powered by a 1-3/4 hp motor, which provides enough power to cut the toughest hardwoods. Unlike many other table saws, the motor is located in-board and out of the way so the saw can be stored against a wall and out of the way when not in use. There is a built in dust collection port making it easy to attach to a vacuum or dust-collection system. The DeWalt DW746 comes with a 10" 30 tooth blades and miter gauge.
Technical Specifications
- Horsepower: 1-3/4 HP
- No Load Speed: 3000 rpm
- Blade Diameter: 10”
- Arbor Size: 5/8”
- Dust Port Diameter: 2-1/2”
- Depth of Cut at 90 Degrees: 3-1/8”
- Depth of Cut at 45 Degrees: 2-1/8”
- Max Rip to Right of Blade with DW7468: 30” Saw with DW7464: 52"
- Max Rip to Left of Blade: 16”
- Max Width of Dado: 13/16”
- Tool Weight: 254 lbs
